CO2 concentration — co2_conc • fluxible

CO2 concentration with measurements meta data

Usage

co2_conc

Format

A tibble with 1251 rows and 13 variables

datetime: Datetime at which CO2 concentration was recorded.
temp_air: Air temperature inside the flux chamber in Celsius.
temp_soil: Ground temperature inside the flux chamber in Celsius.
conc: CO2 concentration in ppm.
PAR: Photosynthetically active radiation inside the chamber in micromol/s/sqm.
turfID: Unique ID of the turf in which the measurement took place.
type: Type of measurement: ecosystems respiration (ER) or net ecosystem exchange (NEE).
start: Datetime at which the measurement was started.
end: Datetime at which the measurement ended.
fluxID: Unique ID for each flux.
n_conc: Number of data point per flux.
ratio: Ratio of n_conc over length of the measurement (in seconds).
flag: Data quality flags.

Examples

co2_conc
#> # A tibble: 1,251 × 13
#>    f_datetime          temp_air temp_soil f_conc   PAR turfID       type 
#>    <dttm>                 <dbl>     <dbl>  <dbl> <dbl> <fct>        <fct>
#>  1 2022-07-28 23:43:35    NA         NA     447. NA    156 AN2C 156 ER   
#>  2 2022-07-28 23:43:36     7.22      10.9   447.  1.68 156 AN2C 156 ER   
#>  3 2022-07-28 23:43:37    NA         NA     448. NA    156 AN2C 156 ER   
#>  4 2022-07-28 23:43:38    NA         NA     449. NA    156 AN2C 156 ER   
#>  5 2022-07-28 23:43:39    NA         NA     449. NA    156 AN2C 156 ER   
#>  6 2022-07-28 23:43:40    NA         NA     450. NA    156 AN2C 156 ER   
#>  7 2022-07-28 23:43:41    NA         NA     451. NA    156 AN2C 156 ER   
#>  8 2022-07-28 23:43:42    NA         NA     451. NA    156 AN2C 156 ER   
#>  9 2022-07-28 23:43:43    NA         NA     453. NA    156 AN2C 156 ER   
#> 10 2022-07-28 23:43:44    NA         NA     453. NA    156 AN2C 156 ER   
#> # ℹ 1,241 more rows
#> # ℹ 6 more variables: f_start <dttm>, f_end <dttm>, f_fluxID <fct>,
#> #   n_conc <dbl>, ratio <dbl>, flag <chr>